"high temperature fans and blowers"

Single Suction Backward Solid Waste And Hazardous Waste Treatment Industry Blower Introduction The 6-06 series dust exhaust centrifugal fan has the characteristics of low dust accumulation and wear resistant. It is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be used as a general ventilator for ventilation. Application Centrifugal

Air Supply Of Industrial Rotary Kilns Anti-Explosion Centrifugal Blower Fan Introduction 6-04 series industrial centrifugal blower fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. This series of

Long Life Stainless Steel Industrial Boiler Induced Draft Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in

Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan Introduction The Alternating Current Fluidized Bed Boiler Dust Collector Blower Fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles

Coal Gas Boosting And Conveying Ventilation Stainless Steel Blower Introduction The Stainless Steel Blower can be used as the blast for various furnace forging furnaces. Coal Gas Boosting And Conveying Ventilation Stainless Steel Blower is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials. Coal Gas Boosting And Conveying Ventilation Stainless Steel Blower is suitable for forced ventilation,

High Volume Flue Gas Desulfurization Material Handling Centrifugal Blower Fan Introduction The High Volume Flue Gas Desulfurization Material Handling Centrifugal Fan is suitable for indoor ventilation in general factories and large buildings. High Volume Flue Gas Desulfurization Material Handling Centrifugal Blower Fan can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self

High Wear Resistance Air Filtration System Centrifugal Exhaust Flow Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal flow fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The centrifugal flow fan can also be used as the blast for various furnace forging furnaces. High Wear Resistance Air Filtration System Centrifugal Exhaust Flow Fan is also suitable for conveying air and non

Long Lifetime Large Capacity Dust Collector Centrifugal Blower Fan Introduction The bearing housing of the Long Lifetime Large Capacity Dust Collector Centrifugal Blower Fan uses labyrinth mechanical seal, unique anti-leakage design inside, vent hole at the top, and sealing grease at the joint, completely eliminating the possibility of oil leakage in the bearing hosing.After annealed treatment, the internal stress of the structure generated during welding can be completely

Large Capacity Steam Boiler Explosion Proof Centrifugal Blower Fan Introduction The Large Capacity Steam Boiler Explosion Proof Centrifugal Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly